Afar-Station Servo Mashiin labanlaab ah oo isku xidha (Tolida Toos ah iyo Madaxa Khadka Habaynta Toos ah)
Tilmaamaha Alaabta
● CNC9 dhidibka CNC ee xarunta machining waxaa loo isticmaalaa in lagu xakameeyo iyo la shaqaynta interface man-mashiinka.Shaqada iyo xasiloonida mashiinka xirmada kuma qancin karaan dhammaan nidaamyada PLC ee hadda jira ee suuqa.
● Waxay leedahay sifooyinka xawaaraha degdega ah, xasilloonida sare, booska saxda ah iyo isbedelka dhimashada degdega ah.
● Mashiinku wuxuu ku qalabaysan yahay dhererka istator-ka toosan, aaladda meelaynta stator, aaladda riixida, aaladda quudinta siliga tooska ah, aaladda xiirista tooska ah, aaladda nuugista tooska ah iyo aaladda ogaanshaha siliga tooska ah.
● Meesha shaqada wareega ee afarta saldhig waxay badbaadisaa waqtiga gelinta stator si toos ah, sidaas darteed si weyn u wanaajinaya waxtarka guud.
● Mashiinkaani wuxuu si gaar ah ugu habboon yahay mashiinka qaboojiyaha qaboojiyaha, qaboojiyaha kombaresarada motor stator silig ku xidhidhiyaha, iyo sida gaaban ee wax soo saarka motor line automation.
● Mashiinkan waxa kale oo uu ku qalabaysan yahay qalabka dabada jillaabka, kaas oo leh shaqooyinka guntida tooska ah, adkaynta tooska ah, goynta tooska ah iyo nuugista tooska ah.
● Naqshadaynta gaarka ah ee kamarad laba-track ah ayaa la qaatay.Ma qabato oo ma rogo xaashida booska, ma xumayso fiilada naxaasta ah, timo ma leh, xidhidhiyaha maqan ma jiro, ma dhaawacdo xadhigga xadhigga iyo ma goyso siliga tie.
● Kantaroolka nidaamka shidaalka ee tooska ah wuxuu hubin karaa tayada qalabka xitaa in ka badan.
● hagaajinta saxda ah ee taayirrada gacanta waa sahlan tahay in la saxo oo laga dhigo bini'aadantinimo.
● Naqshad macquul ah oo qaab dhismeedka makaanikada ah iyo isticmaalka saxda ah ee kala duwan ee waxqabadka sare ee birta, naxaasta, aluminiumka iyo walxaha kale waxay ka dhigaan qalabku si dhakhso ah u socdo, waxay leeyihiin buuq hoose, waxay leeyihiin nolol adeeg oo dheer, waxayna leeyihiin waxqabad xasilloon.
Halbeegga Alaabta
| Lambarka alaabta | LBX-03 |
| Tirada madaxda shaqeeya | 1 PCS |
| Xarunta shaqada | 4 saldhig |
| Dhexroorka dibadda ee stator | ≤ 160mm |
| Dhexroorka gudaha ee Stator | ≥ 30mm |
| Waqtiga wareejinta | 0.5S |
| La qabso dhumucda istator-ka | 25mm-155mm |
| dhererka xirmada silig | 10mm-60mm |
| Habka dhirbaaxada | Afyare by Afyare, Afyare by Afyare, jeedal qurxoon |
| Xawaaraha garaaca | 24 boosaska ≤18S |
| Cadaadiska hawada | 0.5-0.8MPA |
| Korontada | 380V saddex-waji oo afar xadhig ah 50/60Hz |
| Awood | 5kW |
| Miisaanka | 1500kg |
| Cabirka | (L) 2100* (W) 1050* (H) 1900mm |
Qaab dhismeedka
Tilmaamaha badbaadada ee isticmaalka mashiinnada xidhitaanka siliga tooska ah
Mashiinada casriga ahi waxay sii wadaan inay gacan ka geystaan horumarinta wax soo saarka iyo wax soo saarka ee dhammaan warshadaha.Tusaale ahaan, mashiinada isku xidha siliga tooska ah ayaa isbedelay habab wax soo saar dhaqameed oo u baahan xoog badan.Mashiinkan, kharashka shaqada ayaa si weyn loo dhimay, taasoo keentay faa'iido badan.Si ballaaran loo isticmaalo soo saarista qaybo kala duwan oo makaanik ah, sida koronto-dhaliye, matoorada dhaqida, kombarada qaboojiyaha, matoorada marawaxada iyo mashiinada kale.
Waxaa jira khataro dabiici ah oo ku saabsan isticmaalka mishiinka siliga tooska ah, gaar ahaan marka la macaamilayo mishiinada culus.Badbaadada waa in mudnaanta koowaad la siiyaa si looga hortago shilalka ama dhaawacyada.Waa kuwan qaar ka mid ah taxaddarrada badbaadada ee ay tahay in la tixgeliyo marka la isticmaalayo mashiinka xirmada siliga tooska ah:
1. Kahor intaadan isticmaalin mishiinka siliga ku xidha, diyaari agabka ilaalinta shaqada, oo ay ku jiraan galoofyada, muraayadaha, dharka ilaalinta, iwm.
2. Kahor intaadan bilaabin shaqada, qiimee xaalada korantada iyo furayaasha si aad u hubiso inay si fiican u shaqaynayaan.
3. Ha xidhin galoofisyada marka aad shaqaynayso mishiinka, si aan loo qaban oo aanay waxyeello ugu geysan qalabka.
4. Haddii ay jirto dhibaato caaryada, fadlan iska ilaali inaad ku taabato gacmahaaga, laakiin xidh oo hubi mishiinka.
5. Kadib markaad dhammayso hawsha, xasuuso inaad nadiifiso mishiinka rarka siliga oo dib ugu celi meesha kaydinta.
Guangdong Zongqi Automation Co., Ltd. waxay ku takhasustay soo saarista qalabka wax soo saarka ee gawaarida.Alaabooyinka ugu muhiimsan waa afar-madax iyo mashiin toosan oo siddeed saldhig ah, lix madax iyo laba iyo toban goobood oo toosan mashiinka dabaysha, mashiinka dhejiska fiilada, mashiinka isku dhafan, mashiinka isku dhafan ee isku dhafan, xariiqda toosan ee rotor, mashiinka qaabeynta, mashiinka dabaysha toosan, Slot mashiinka warqadda, mishiinka xadhigga xadhigga, motor stator line si toos ah, hal-wejiga wax soo saarka motor, qalabka wax soo saarka motor saddex-waji.Shirkadeena waxay isku xirtaa R&D, wax soo saarka, iibinta iyo adeegga iibka kadib si ay macaamiisha u siiso shabakad suuqgeyneed oo hufan.Waxaan rajeyneynaa inaan kula shaqeyno si aan u gaarno yoolalkaaga ganacsi.
